IP66 METRIC BOXES 6412 ESWTB
Water, oil & dust tight windowed terminal boxes, metric
The 6412 ESTBW screw cover oil
and dust tight enclosures are
used indoors and outdoors to
protect the enclosed controls
from dust, dirt, oil and water
splashing. The box and cover are
made from code gauge steel with
all seams continuously welded.
The window is made of ¼ inch
lexan. The opening has a curled
lip around all sides to prevent
dripping water from entering the
enclosure when the door is open,
it also increases rigidity. A high
quality robotically poured-inplace
seamless gasket ensures a
complete and durable water tight
seal. The enclosure can be internally
mounted or externaly
mounted using optional wall
mounting feet. These feet have
oblong holes to facilitate installation.
Mounting brackets are supplied
on the bottom of the enclosure.
Inner panels can be ordered
separately, see page 190.
Enclosures are finished with heat
fused polyester powder, electrostatically
applied on a pretreaded
base. Box is RAL7035 textured
light gray.
CSA Certified / UL Listed.
NEMA/EEMAC 4-12 / IP66
IP65 METRIC CONSOLES 6500 CO
Oil & dust tight metric monobloc consoles
The 6500 CO series monobloc
consoles are used to protect
equipment against oil and dust.
These cabinets are made from 14
GA steel. The opening has a
curled lip around all sides to
increase rigidity and to ensure
complete contact against the
high quality seamless poured
gasket. Gas spring cylinders
facilitate door operation. Dual
access doors are provided. The
captive pins of the concealed
hinges can be pulled to remove
the door. External mount locking
mechanisms ensure positive
closing.
The 6500 CO comes complete
with a 12 GA galvanized inner
panel which is double bent for
maximum rigidity and which
mounts on M8 welded studs.
The consoles are finished with
heat fused polyester powder,
electrostatically applied on a pretreaded
base or in type #4 stainless
steel finish. Sections are
RAL7035 textured light gray.
NEMA/EEMAC 12-13 / IP65
IP65 METRIC CONSOLES 6500 series
Oil & dust tight metric modular consoles, 400mm depth
The 6500 400mm depth series
modular consoles are used to
protect equipment against oil and
dust. These cabinets are made
from 14 GA or 16 GA steel. The
opening has a curled lip around
all sides to increase rigidity and to
ensure complete contact against
the high quality seamless poured
gasket. Gas spring cylinders
facilitate door operation. Three
top sections can be mounted
over the 6500 MCO : the 6500
MWD, 6500 MTU and 6500 WD.
The 6500 MWD is made to be
installed under the 6500 MTU.
The captive pins of the concealed
hinges can be pulled to remove
the door. External mount locking
mechanisms ensure positive
closing. The 6500 MCO and 6500
MTU come complete with a 12
GA galvanized inner panel
which is double bent for maximum
rigidity and which mounts
on M8 welded studs.
The consoles are finished with
heat fused polyester powder,
electrostatically applied on a pretreaded
base. Consoles are
RAL7035 textured light gray.
NEMA/EEMAC 12-13 / IP65
|
