NEMA 1 SAFETY DISCONNECT 5100 ESA
Safety disconnect enclosures
The 5100 ESA right flangemounted
safety disconnect
enclosures are used where the
control installation does not
demand a high degree of protection
(such as watertight or dust
tight), but where a quality enclosure
is warranted. The 5100 ESA
are made from quality 14 GA or
16 GA steel, with corner seems
continuously welded. The opening
has a curled lip around three
sides to prevent dripping water
from entering the enclosure when
the door is open, it also increases
rigidity. The pins of the concealed
hinges can be pulled out to
remove the door. A ¼ turn locking
mechanism interlocks with the
switch to prevent opening the
door when the power is live.
Internal mounting holes are provided.
Each enclosure comes
complete with a 12 GA inner
panel which is double bent † for
maximum rigidity and which
mounts on M8 welded studs.
Enclosures and panels are finished
with heat fused polyester
powder, electrostatically applied
on a pretreaded base. Box is
ANSI/ASA 61 gray, panel is white.
CSA Certified / UL Listed
NEMA/EEMAC 1 / IP30
NEMA 12-13 SAFETY DISCONNECT 5500 ESY
Safety disconnect enclosures
The 5500 ESY right flangemounted
safety disconnect
enclosures are used indoors for
protection against dirt, dust and
water splashing. The 5500 ESY
are made from quality 14 GA or
16 GA steel, with corner seems
continuously welded. The opening
has a curled lip around three
sides to prevent dripping water
from entering the enclosure when
the door is open, it also increases
rigidity. The pins of the concealed
hinges can be pulled out to
remove the door. The 5500 ESY
features a convenient factoryinstalled
door handle which interlocks
with the disconnect switch
and facilitates the installation of
the enclosure, streamlines the
ordering process and increases
the ease of use of the enclosure.
Enclosures higher than 42” are
equipped with a 3 point locking
mechanism while smaller enclosures
come with a 2 point locking
mechanism. Door stiffeners are
also provided on larger models.
Internal mounting holes are provided.
Each enclosure comes
complete with a 12 GA inner
panel which is double bent† for
maximum rigidity and which
mounts on M8 welded studs.
Enclosures and panels are finished
with heat fused polyester
powder, electrostatically applied
on a pretreaded base. Box is
ANSI/ASA 61 gray, panel is white
(other colors available).
CSA Certified / UL Listed
NEMA/EEMAC 12-13 / IP65
NEMA 12-13 SAFETY DISCONNECT 5500 UFD
Double door enclosure for right flange mounted disconnect
The 5500 UFD oil and dust tight
right flange mounted safety disconnect
enclosures are used
indoors for protection against dirt,
dust, oil and water splashing.
The 5500 UFD are made from
quality code gauge steel with all
seams continuously welded. The
center post can be removed to
facilitate the installation of the
inner panel. The ball bearing pins
of the concealed die cast hinges
can be easily pulled out to
remove the doors. Three point
automotive padlockable handles
ensure positive closing on both
doors. The new latching rod system
interlocks with the disconnect
handle and eliminates the
need to purchase an adaptor. A
door interlock is installed to
ensure that the left door (slave)
can only be opened if the right
door (master) is open and the disconnect
switch is powered off.
Enclosures have 15” floor mounting
feet installed. Door and body
stiffeners are provided on larger
models. Each enclosure comes
complete with a painted white
steel inner panel which mounts
on M10 welded studs. A print
pocket is provided. Enclosures
and panels are finished with heat
fused polyester powder, electrostatically
applied on a pretreaded
base. Box is ANSI/ASA 61 gray.
CSA Certified / UL Listed
NEMA/EEMAC 12-13 / IP65
|
