|
Material |
Stainless Steel AISI 304, 0.8 mm thickness and transparent part in tempered glass |
|
IP Rating |
IP66/67 |
|
Operating Temperature |
-30°C to 55°C |
|
Certification & Approvals |
Type Examination Certificate INERIS 01ATEX3002X |
|
|
GOST Certificate РОСС IT.ГБ04.В00509 |
|
|
|
|
Standards |
EN60079-15IEC60079-15 |
|
|
|
|
Ex-code |
{ex} II 3 GD |
|
|
Ex nA II T5 Tamb. -30°C to 50°C |
|
|
Ex nA II T4 Tamb. -30°C to 55°C |
|
|
Ex tD A22 T90°C Tamb. -30°C to 40°C |
|
|
Ex tD A22 IP66/67 T100°C Tamb. -30°C to 50°C |
|
|
Ex tD A22 IP66/67 T105°C Tamb. -30°C to 55°C |
|
|
According to European Directive 94/9/EC (ATEX) |
|
|
For Zone 2 / Zone 22 |
|
|
|
|
Gaskets |
Special cross section tightness gasket, silicon rubber made (close cells) located in housing channel between body and window frame. |
|
|
|
|
Entries |
Body complete of two diam. 21mm through holes for cable entries, one complete of metallic plug with lock nut and gasket, and the other one with plastic plug for dust protection. |
|
|
|
|
Hardware and Screw |
AISI 304 Stainless Steel external hardware and screws |
|
Lamps |
RMS Series is suitable for two pins fluorescent lamps G13 socket PHILIPS TL-D or equivalent. |
|
Lamps Wattage |
18 / 36 W |
|
Ballast |
high-frequency electronic ballast in conformity with EN 60079-15 and IEC 60079-15 |
|
Rated operation voltage (UE) |
220-240 V |
|
Frequency |
50 ÷ 60 Hz |
|
Power factor |
> 0,95 |
|
|
|
|
Accessories |
Suspension mounting kit “G1” AISI 04 made |
|
available upon request |
Pole mounting kit “P12” 1 ½” size AISI 304 made |
|
|
Wall mounting kit “H1” AISI 304 made |
|
|
Emergency Service RMS 550 lighting fixtures for Emergency Service are available:Ø RMS 550...PNL/LE-PØ RMS 550...PNL/LE-LED (Led self Powered Emergency) |
|
|
|
|
Note |
Very low pollution at the end of operative life time of lighting fixtures. |
|
|
The inorganic materials used for RMS, like stainless steel and glass, allow a recycle of 95%, only electrical components and insulation of single core wires need some more care. No through holes between inside and outside of luminaries, out of holes for power supply cable whatever protected by a suitable waterproof cable gland (on request). Therefore, during the time, release would be possible where, for fixing devices, there are through holes and relevant gaskets. |
