首頁 產品項目 exm NEMA1電控箱
 
NEMA1電控箱
 

NEMA 1 ENCLOSURES 1100

Small utility enclosures

The 1100 are used where the
control installation does not
demand a high degree of protection
(such as watertight or dust
tight), but where a quality enclosure
is warranted. Boxes and covers
are made from quality code
gauge steel. The enclosures feature
die cast hinges, which are
bound to the cover by an exclusive
concealed hinge pin system.
The cover can be removed by
unfastening the anti-vibration lock
nuts. Enclosures are closed with a
¼ turn lock that ensures tight positive
closing against cushions.
Four internal mounting holes are
provided. Optional external
mounting is available (885
ESCHMF).
Each enclosure comes complete
with a 14 GA inner panel
that mounts on weld nuts.
Enclosures and panels are finished
with heat fused polyester
powder, electrostatically applied
on a pretreaded base.
The box is ANSI/ASA 61 textured
gray, the panel is white (other colors
available).
CSA Certified / UL Listed
NEMA/EEMAC 1 / IP30
 
 

NEMA 1 ENCLOSURES 1100 W

Small windowed utility enclosures

The 1100 W are used where the
control installation does not
demand a high degree of protection
(such as watertight or dust
tight), but where a quality enclosure
is warranted. Boxes and covers
are made from quality code
gauge steel. The enclosures feature
die cast hinges, which are
bound to the cover by an exclusive
concealed hinge pin system.
The cover can be removed by
unfastening the anti-vibration lock
nuts. Enclosures are closed with
a ¼ turn lock that ensures tight
positive closing against cushions.
The window is made with
self-extinguishing polycarbonate.
Four internal mounting holes are
provided. Optional external
mounting is available (885
ESCHMF).
Each enclosure comes complete
with a 14 GA inner panel
that mounts on weld nuts.
Enclosures and panels are finished
with heat fused polyester
powder, electrostatically applied
on a pretreaded base.
The box is ANSI/ASA 61 textured
gray, the panel is white (other colors
available).
CSA Certified / UL Listed
NEMA/EEMAC 1 / IP30
 

NEMA 1 ENCLOSURES 1100 DF

Type DF junction boxes

The 1100 DF boxes are used as
junction or pull boxes and are
suitable for surface mounting with
the standard screw cover or for
flush mounting using either of the
two optional covers (1100 HCF or
1100 FCD on page 212). Boxes
and covers are made from 16 GA
or 14 GA steel. Four internal
mounting holes, bonding screws
and attachment are provided. All
four sides have concentric knockouts,
except as noted.
Also available without knockouts
(add suffix "N" to the catalog number).
Enclosures are finished with
ANSI/ASA 61 gray heat fused
polyester powder, electrostatically
applied on a pretreaded base.
(other colors available).
CSA Certified
UL Listed where noted *
NEMA/EEMAC 1 / IP30
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

TEL:(02) 8994-2560  FAX:(02) 8994-2876 新北市新莊區福壽街202巷18號
Copyright© 2011 sunmaxsys. All rights reserved.

E-MAIL:jim.chou@sunmaxsys.com.tw