首頁 產品項目 Schroff Systems
 
Systems
 

AdvancedTCA 450/40 series, 14 slot, DC

AdvancedTCA 450/40 FC Series, 14 Slot, DC

  • 450 W cooling capacity per slot at an ambient temperature of 55 °C
  • -48 VDC/-60 VDC input voltage, two redundant power entry modules (PEM)
  • 2 redundant hot‐swap fan trays in push‐pull configuration, airflow from bottom front to top rear
  • Air filter exchangeable from front
  • Prepared for 2 x Schroff shelf managers with Pigeon Point ShMM 500 for IPMB topology
  • UL recognized, E229721 type T11
  • Conforms to AdvancedTCA Standard PICMG 3.0 rev.3.0
  • Rear I/O on all slots

VME64x-based systems 7 slot, without rear I/O

VME64x-based systems 7 U, 12 slot, with rear I/O

  • Tower system for vertical board mounting with board format; Front: 6 U, 160 mm deep
  • Backplane VME64x7 slot, 6 U, without P0 plug
  • PSU, open frame, 560 W (400 W at < 180 VAC)
  • Heat dissipation by 2 fans, from front to rear; temperature‐controlled with fan control module (FCM)
  • Display module for DC operating voltages and fan alarm
  • Option to mount a 5.25" DVD drive unit

 

CompactPCI Serial 4 U, 9 slot, 44 HP, without Rear I/O, with 19" power supply

  • System for vertical board mounting with board format; Front: 3 U, 160 mm deep, 9 slot
  • Backplane 9 slot, 3 U, CompactPCI Serial
  • 19" PSU, 300 W, 3 U, 8 HP
  • Heat dissipation by two radial fans, from front to rear
  • System in accordance with IEC 60297‐3‐101, ‐102, ‐103; IEEE 1101.1, 1101.10/11); Backplane conforms to PICMG 2.30 CPCI‐S.0 

MicroTCA.4 system, 9 U, 84 HP, for 12 double mid‐size AdvancedMC modules

 

  • In accordance with PICMG MTCA.4 R1.0 specification
  • 9 U, 84 HP system for 12 double mid‐size‐AdvancedMC modules, 2 double full‐size MCHs and 4 double full‐size power modules
  • 12 rear transition module slots for double mid‐size RTM´s
  • Backplane with dual star topology, direct connections for S-ATA/SAS, clock and trigger lines as per PICMG MTCA.4
  • Telecom and fabric clock topology accordance to PICMG AMC.0 R2.0
  • 2 hot‐swap fan trays with cooling unit manager (CU EMMC), airflow from bottom front to rear top
  • Fan speed for front and rear sections can be separately adjusted via MCH 

VPX case system, 4 U, 5 slot, with/without Rear I/O

VPX case system, 4 U, 5 slot, with/without Rear I/O

  • System for vertical board mounting with board format 3 U
  • VPX backplane, in accordance with VITA 46, 5 slot, 3 U, 0.8" pitch, full mesh topology
  • 19" PSU, 250 W, 3 U, 8 HP (further PSU optional)
  • Heat dissipation by 2 radial fans, from front to rear

 

 

 

 

 

其他產品至原廠逛逛去.......

 

 

 

 

 
 
檔案下載: 下載
 
 
 
 
 
 
 
 
 
 
 

TEL:(02) 8994-2560  FAX:(02) 8994-2876 新北市新莊區福壽街202巷18號
Copyright© 2011 sunmaxsys. All rights reserved.

E-MAIL:jim.chou@sunmaxsys.com.tw